American Air
(714) 738-3082
License# 749517
Riverside Air Conditioning Repair Los Angeles Air Conditioning Repair

Building Facility Managers • Building Owners • Key Tenants

Prevent Major HVAC Repairs with Scheduled HVAC Inspections


Service / Repair / Inspect - All Commercial HVAC Makes & Models


Commercial • Industrial • Office Buildings



Air filtration Air handlers Condensing units
Chilled water pumps Cooling towers Evaporative coolers
Humidification Rooftop HVAC units Fans

Eric RoosI’m Eric Roos, the owner of American Air Heating & Air Conditioning. For over 23 years, we have worked closely with many commercial building management teams in Orange and Riverside Counties to service, maintain and repair their HVAC Systems.p Regularly scheduled Air Conditioning system inspections performed by an experienced contractor will reduce the likelihood of major repairs and prolong the life of your HVAC System. We offer you the following:

  • Customized - specific maintenance plans to meet your objectives
  • Competitive up-front service options and pricing
  • Scheduled “worry free” HVAC inspections - maintenance
  • Strategic planning to increase the longevity of your HVAC system
  • Ongoing information on the latest HVAC trends and new technologies
  • Experienced - 23+ years as a licensed contractor servicing commercial HVAC systems
  • Longtime relationship with building owners / managers just like you
  • Serving all of Orange County and south-west Riverside County

HVACYour HVAC system maybe the most expensive equipment in your building, and as you know, HVAC systems are critical to your tenants building use. Start protecting your building TODAY. Call American Air and schedule on-going HVAC inspections / service. After we meet, you will be confident that you will receive the best and most honest professional service.

In the event there is an HVAC system failure, American Air provides 24/7 emergency service. Any system down time will be less since we know the history and specifics of your HVAC systems

Your Custom HVAC Inspections / Servicing is based your systems.

Your experienced technician will perform a comprehensive inspection to ferret and repair out any potential heating and cooling system problems and will include.

The reason for an annual HVAC inspection is similar to the reasons why you have an annual physical. We locate and repair minor issues before they advance to large costly repairs.


Our HVAC System Check List

Air Conditioner and Furnace System Maintenance – Tune-up

Check all functions and wear Check the thermostat calibration Check thermostatic expansion valve (TXV) for proper operation
Clean and/or replace standard air filters Clean condensate drain Examine equipment condition area, and clearances
Examine installation quality In place, clean and adjustment blower components Inspect condenser coil for dirt or damage
Inspect evaporator coil Inspect refrigerant lines, insulation and penetration integrity Inspect seismic restraints
Lubricate all moving parts Measure temperature difference between supply air and return air Measure volts and amps
Monitor cooling cycle Monitor refrigerant pressure Test AC starting capabilities
Test air conditioner safety controls Tighten electrical connections Written Report

Since 1998 American Air - Heating & Air Conditioning has serviced all of Orange County
and South-West Riverside County, California:

AC


HVAC System Components & How You System Works

An HVAC system is simply a collection of special HVAC components working together to move heat to where it is wanted (the conditioned space) or to remove heat from where it is not wanted (the conditioned space) and put it where it is unobjectionable (the outside air).

HVAC System Components

The basic components in a common central commercial HVAC system as illustrated are:

HVAC DiagramFan(s) circulate the supply air (SA) and return air (RA).

Supply air ductwork moves the air from the supply fan to the environment space.
Air devices like the air outlets send return air inlets.

The ductwork moves the air flows back from the environment space to the mixed air chamber.
The outside air (OA) device allow for the entrance of outside air into the mixed air chamber.
Filter section(s) remove dirt and dust particles.

Depending on the type of heat exchanger (hot water coil(s), steam coil(s), refrigerant evaporator, or chilled water coils) add heat to or to remove heat from the circulated air.

Some systems use auxiliary heating devices such as natural gas furnace(s) or electric heating element(s).

The compressors function is to compress the refrigerant vapor and pump the refrigerant around the system.

Your condenser, remove heat from the refrigerant vapor and then condense it to a liquid.
Fan(s) circulate the outside air across air-cooled condensers.

Some central systems use water or steam boiler(s) as the heating source, but some central systems use water chiller(s) as their central cooling source.

Many system controls are used to start, stop, or regulate the flow of air, water, steam, refrigerant and electricity.


The Types of Heat Transfers Methods

The three types of heat transfer are conduction, radiation, and convection. When your hand touches a cold wall, this is an example of heat transfer by conduction. A glowing red-hot portable electric heater is an example of heat transfer by radiation.

When air is heated, it rises; this method is called "natural" convection. "If a fan or pump is used, this is called Forced" convection.

HVAC System Example

Deciding on the size of your HVAC system is calculated based on the heating, cooling and ventilation loads. The air volumes are in units of cubic feet per minute (cfm).

As an example, if the total volume of air supplied to the environmentally controlled space is 6,000 cfm. Of this 6,000 cfm circulated through the space and back to the air handling unit (AHU), 1,000 cfm is exhausted in the return air plenum through the exhaust air damper. The remaining 5,000 cfm goes into the mixed air chamber.

At the same time, 1,000 cfm is exhausted; another 1,000 cfm is brought in through the outside air (OA) dampers in the mixed air plenum. This 1,000 cfm of outside air is mixed with the remaining 5,000 cfm of return air. The 6,000 cfm of mixed air then travels through the filters into the coil sections.

Ventilation is the process of supplying outside air to buildings in the proper amount to offset the contaminants and odors produced by people and equipment.

Yelp Google Places Angies List

All Work Guaranteed

20+ Years Experience

Heat Pumps Repairs

Low Competitive Rates

State Licensed, Bonded & Insured

Wall Heaters • Floor Air Furnaces

Commerical Account Specialist

Dryer Vent Cleaning and Repairs

We Service All Brands

RadiatorsWarehouse.com

California License # 749517

Air Conditioning Repair

Home | HVAC Repairs | HVAC Maintenance | New HVAC Systems | Areas Served | Contact Us | Our Work

Call Today - 714.738.3082

American Air Heating and Air Conditioning